Freeze Dryer Manufacturers
FREEZE DRYER
MAKE- Roch Mechatronics Inc.
Model No: FD-50
Roch laboratory freeze dryers are specially designed to meet research and development phase freeze drying requirements in the increasingly demanding R&D centers in industry and academia. Designed according to GLP principles to comply with the strictest international standards, the laboratory freeze dryer range covers small tabletop units to sophisticated pilot equipment. Roch freeze-drying units are designed and constructed by the strictest international standards and a moral test process is performed before dispatch to the customer.
The quality of Roch equipment and a commitment to providing the best possible technical service make ROCH a leader in laboratory freeze dryers. Moreover, Roch’s experience in the freeze-drying field, through an established in-house freeze-drying laboratory, guarantees customers not only the choice of the most suitable unit but also expert advice on how it should be used.
Freeze Dryer
A freeze dryer manufacturer, also known as a lyophilizer, is a device used to remove moisture or water content from substances while preserving their structure and properties. This process is called freeze-drying or lyophilization. It is commonly used in various industries such as food preservation, pharmaceuticals, biotechnology
| SN | Features |
| 1.1 | Live freeze drying process observation. |
| 1.2 | One button auto start-up automatic operation to the drying mode. |
| 1.3 | Big open stainless steel collector with pre-freeze function |
| 1.4 | Transparent drying chamber is robust and convenient. |
| 1.5 | Stainless steel shelves. Space between adjustable (no screw cover type) |
| 1.6 | Compressor, High condenser capacity, Automatic defrosts. |
| 1.7 | Rapid cold Trap function at low Temperature. Ultra low condenser temperatures for processing a full range of samples (-55ºc + 5°C) or -800C +50C |
| 1.8 | Vacuum pump with oil mist filters with ultimate vacuum 2 X 10-3 mbar with displacement capacity of minimum 100L/min, 220/230 V and 50 Hz. |
| 1.9 | Run Program Graphics Log & Curves storage |
| 1.10 | Green environmental CFC friendly |
| 1.11 | Embedded circuit design, 128 M FLASH |
| 1.12 | Large opening trap, no coil inside |
| 1.13 | Samples pre-freeze function |
| 1.14 | Stainless steel sample holder, common sample plate spacing adjustable |
| 1.15 | CFC Free Refrigeration |
| 1.16 | LCD display drying curves, English interface |
| 1.17 | Big opening of condenser, condenser with pre-freezing function |
| 1.18 | Low noise compressor, good efficiency long service life |
| 1.19 | Condenser and operation panel are all 316 stainless steel |
| 1.20 | Drying chamber with organic glass is safe and visible |
| 1.21 | Small volume, easy and convenient operation |
| SN | Vacuum pump with oil mist filters with ultimate vacuum 2 X 10-3 mbar with displacement capacity of minimum 100L/min, 220/230 V and 50 Hz. Rapid Vacuum to produce quick temperature equilibration and recovery, when needed Receptacles, in-chamber, moisture –proof receptacle IN Top Press chamber & sample trays & in the Multi pipeline for micro tubes or flasks. | |
| 2.1 | Pumping speed | 2l/s |
| 2.2 | Ultimate pressure | 6*10-2Pa |
| 2.3 | Power | 0.37kw |
| 2.4 | Voltage | 220V |
| SN | Category | Description |
| 3.1 | THE INNER COLD TRAP CHAMBER | Lyopholizer is made of heavy gauge stainless steel sheet of SS-304 grade. |
| 3.2 | PRE FREEZE CHAMBER | Bell Type made transparent Plexi Glass Cylindrical with corrosion resistant steel Trays to view in process lyophilizing. |
| 3.3 | OUTER BODY | Lyopholizer constructed out of Textures Stainless Steel Casing with powder coating. |
| 3.4 | STEEL SHELVES | Lyopholizer is supplied with adjustable samples Trays fabricated from 304 grade SS sheets minimum 1.2 mm thick. |
| 3.5 | VENTILATION AND CONTROL | Vent connection with restrictor flap adaptive multifunctional digital PID microprocessor controller. |
| 3.6 | INSULATION | The gap between the walls is filled high-grade PUF, which ensures maximum thermal efficiency in Lyopholizer with insulation of 50 mm. |
| Make | Roch Mechatronics |
|---|---|
| Model | FD-50 |
| Type | Top Press Model |
| Defrost | Hot gas solenoid system |
| Vacuum degree (No Load) | <=10 Pascal |
| Condenser temperature | -50 |
| Freeze drying area | 0.12m2 |
| Ability to capture water | 4 kg |
| Plate Load Capacity | 2 liter |
| Dimension | 460x625x(370+465) mm |
| Power | 700 W |
| Voltage | 220V, 50Hz; 110V, 50Hz; 110V, 60Hz |
| Tray Size | ?200mm , 4 layers |
| Condenser Capacity | 3-4L/24H |
| Cooling | Air, draughty, ambient temperature 25 |
| Host Weight | 41 Kg |