Salt Spray Test Chamber Manufacturer
Salt Spray Test Chambers
ROCH offer salt spray test chamber (SF-CCT) as well as a traditional salt spray chamber (SF-SST). The SF-CCT chambers are compatible with multiple test standards including automotive standards and they can be alternated/cycled between varied humidity programs with the traditional salt spray. ROCH offer both a cyclic corrosion test chamber (SF-CCT) as well as a traditional salt spray chamber (SF-SST). The SF-CCT chambers are compatible with multiple test standards including automotive standards and they can be alternated/cycled between varied humidity programs with the traditional salt spray. Salt spray test in a single chamber Corrosion testing involves multiple test standards, which are developed by the automobile manufacturers or are according to the specific country standards. To match this diversity, ROCH has engineered both its SF-CCT as well as SF-SST to comply with more than 100 global test standards.
In recent years it has been proven that cyclic corrosion tests offer a more realistic simulation of real time corrosive environments than the traditional salt spray testing method. The salts spray test revolves around a single set point of temperature (ambient to 55oC) on the continuous mode. It lacks the role of real-life conditions. such as condensation humidity, air-drying etc. making the test less reliable than the cyclic corrosion test. Though ROCH offer both variants (cyclic corrosion test as well as salt spray test) of the chamber, it always suggests opting for SF-CCT as it is programmed to conduct a whole range of corrosion tests such as wet cycle, dry cycle, controlled humidity as well as the salt spray test in a single chamber Corrosion testing involves multiple test standards, which are developed by the automobile manufacturers or are according to the specific country standards. To match this diversity, ROCH has engineered both its SF-CCT as well as SF-SST to comply with more than 100 global test standards. It has a mix of all types of test standards ranging from ASTM, MIL, ISO, JASO to GM, NFX, AS, ECC and more. ROCH Salt Spray Test chamber meet the requirements of basic, continuous salt spray tests conducted at a single temperature only, such as ASTM B117 and similar international test standards, and may be used with pH neutral salt solutions (NSS) or those acidified by the addition of Acetic Acid (ASS) or Cupric Acid (CASS) these are specified in ISO and other standards around the world. Salt spray tests are widely performed for various purposes such quality control and corrosion resistance comparison.